| |
1948 |
 |
Electric Motors. |
| |
|
| |
1955 |
|
169 kW (225 HP) 12 pole Slip Ring motor. |
| |
|
| |
1960 |
|
Pole changing Sugar Centrifuge Motors. |
| |
|
| |
1966 |
|
Steam Turbine driven Generators for Sugar Factories. |
| |
|
| |
1972 |
|
500 kW Frequency set to Naval Dockyard. |
| |
|
| |
1978 |
|
India's first twin drive H.T. Motors for Indian Seamless Tube (Mill Drive). |
| |
|
| |
1982 |
|
Development of India's Largest Twin-drive H.T. Motors for Cement Mills (1900 kW, 6.6 kV). |
| |
|
| |
1984 |
|
Frequency Converter comprising synchronous motor and generator together with its voltage regulator and power factor controller.
Synchronous motor - 6.6kV, 50 Hz. 900 kW
Generator 1000 kVA, 460 V, 60 Hz.. |
| |
|
| |
1990 |
|
Pole Amplitude modulated motors - manufactured having two different operating speeds and one winding. |
|
Higher basket size sugar centrifugal motor-2100 kg m2 |
|
6000 kW/11 kV/ 750 RPM Brushless Alternator for Diesel Engine Prime Mover - first in Private Sector. |
| |
|
| |
1996 |
|
Wind Generator - developed |
|
400 / 100 kW, 415 V (TEFC) Synchronous 500/1000 RPM (Synchronous), horizontal foot mounted in IP - 55 enclosure. |
|
250 kW / 60 kW, 415 V, TEFC, 1500 RPM (Synchronous, single speed, flange - mounted in IP - 55 enclosure). |
| |
|
| |
1999 |
|
Development of 70 kW high frequency induction motor for Electric bus. |
| |
|
| |
2001 |
|
Design and Development of water-Jacket cooled 70kW/6Pole/200Volts/2-400Hz motors for Hybrid Electric Vehicle [for the project of ERDC & I, Ashok Leyland Ltd and Ministry of Information Technology - Delhi]. |
|
Design, Development and Field Testing of Micro-processor Based AVR, for standard Alternators, up to 1000KVA. |
|
Design, Development and Testing of 8” Sleeve Bearing for Sugar Generators. |
|
Design and Execution of large rating 6 MW/ 8 Pole/ 11kV Horizontal Hydel Generator for Shimsha Hydel Project [Drawings created on Pro/Engg.]. |
|
Design, Development, Manufacturing and Testing of 400 mm Thrust and Journal tilting Pad Bearing for Hydel Application. |
|
Use of Pro/Eng Software for the Solid Modeling [Shimsa Hydel Generator Prototype] |
|
Design, Development and Approval form RDSD, of Auxiliary Motors for new Railway WAG 9 [Motors VMT, VRH, MCP, M/c Room Blower, Oil cooler Blower, Scavenger Blower, To-Pump, Co-Pump]. |
|
Type “e” Testing of High Voltage TEFC motor of rating 250kW/4P/CHT-400/3.3kV/Type “e” , by External Agency for Petro Chemical Industries. |
|
Design, Development, Manufacturing and Testing of cylindrical Rotor Alternator of Rating 3MW/415V/4P/Water Cooled with 8” Sleeve bearing for Sugar Industries. |
|
Design, Development, Manufacturing and Testing of Vertical motor of Rating 215kW/4P/6.6kV in 315 Frame for GEB. |
| |
|
| |
2003 |
|
Design, Development, Manufacturing and Testing of 800kW/6P/6.6kV/CACA motor for I.D. fan application [For Kutch Lignite Power Station] |
|
Design, Development, Manufacturing and Testing of 565kW/6P/6.6kV/CACA for F.D. fan application [For Kutch Lignite Power Station]. |
|
Design, Development, Manufacturing and Testing of 450kW/4P/6.6kV/TEFC for F.D. fan application, for Nuclear Power Corp. (Kota Unit). |
|
Design, Development, Manufacturing and Testing of Rating 6MW/12P/11kV Horizontal for Kemphole Hydel Project. |
|
Design, Development, Manufacturing and Testing of High Efficiency [97%],low noise[70dB(A)] Larger Rating, Vertical High Voltage Motor for Pump Application. Rating of 1320kW/14P/6.6kV/CUCW [Vijay Wada TPS] |
|
Execution of one number 7MW/4P/11KV Water-cooled cylindrical Rotor Alternators against order, based on Jeumont Collaboration. |
|
Order for 115 Nos. Windmill Generators of rating 225kW(4P)/40kW(6P)415V in Frame CTFG-355 for NEPC, India Ltd. |
| |
|
| |
2005 |
|
Successfully Designed, Engineered, Manufactured and Tested Largest Rating Vertical Motor of rating : 2250 kW (3000hp) 6600 Volts, 595 r.p.m. (10-Pole), Vertical - Mounting with Closed-Air-Circuit-Air-Cooled (C.A.C.A.) for Lift - Irrigation Schemes. Latest design techniques were used to achieve energy efficient design combined with low-noise and vibration levels and optimizes material content and process time. Improvement in assembly, tolerances and clearances were achieved through latest state-of-the-art software like Pro/Engineer. The product has achieved the success as "FIRST - TIME - PASS" with "ZERO DEFECT". |
|
| |
1953 |
|
Textile Electric Motors. |
| |
|
| |
1958 |
|
Hydro Electric & Synchronous Generators. |
| |
|
| |
1963 |
|
Rotor of Sugar Centrifuge Motor made indigenous. |
| |
|
| |
1969 |
|
High Tension Electric Motors. |
| |
|
| |
1975 |
|
National Award for 120kVA Arno Covertor (Recognition Import Substitution). |
| |
|
| |
1981 |
|
Largest 2500 HP Electric Motor designed and manufactured indigenously. |
| |
|
| |
1984 |
|
6.6 kV, 5000 kW synchronous generator. |
| |
|
| |
1986 |
|
Supplied largest Alternator 5.4 MW to Straw Products Ltd. (Orissa) - for steam turbine manufactured by M/s. Blohm & Voss, West Germany - Largest manufactured in Private Sector Co. |
| |
|
| |
1991 |
|
150 kVA Arno Converter. |
| |
|
| |
1998 |
|
Development of large Horizontal and Vertical Induction Generators with high run-away speeds for small hydro applications. |
| |
|
| |
2000 |
|
INCREASED SAFETY: Type ”e” certification from External agency for lower rating medium voltage motors [20 H.P./2 Pole/415Volts]. |
|
Development of compact class H/H Alternators up to 750KVA/415Volts/4 Pole. |
|
Development of medium voltage single bearing Alternators for Diesel Engine Applications. |
|
Design , Development, Manufacturing and Testing of Fan less Vertical Double Cage Motors for Pump application (MIDC-14 Nos.) |
| |
|
| |
2002 |
|
Indigenous Development of “ Pole mounted Auto- Recloser ” for pole mounted Circuit Breaker for Switchgear unit. |
|
Indigenous Development of “Control unit for magnetic Actuator” for Switchgear unit. |
|
Design, Development, Manufacturing and Testing of Permanent Magnet Generator [PMG] for Standard Alternator up to 1000KVA. |
|
Design, Development, Manufacturing and Testing of the larger Rating High Voltage horizontal Motor of Rating 2092kW/11kV/8P/CACA [For Purander Project] |
|
Design, Development, Manufacturing and Testing of Vertical motor of Rating of 2150kW/10P/11kV/Water Cooled [For Purander Project] |
|
Design, Development, Manufacturing and Testing of Marine Alternator of Rating 400kW/415V/1500RPM with in built Water tight construction [IRS Inspecting Authority] |
| |
|
| |
2004 |
|
Order for 300 Nos. Windmill Generators of rating 225kW(4P)/40kW(6P)415V in Frame CTFG-355 for NEPC, India Ltd. |
|
